Dishwashers perform a fairly basic function, but they consist of a number of complex parts. When one of these parts lets you down, it can be difficult to figure out. Here are some common problems and their potential causes.
Dishwasher not draining
If your dishwasher fills with water but does not drain, it can cause serious damage. Firstly, you might not be able to remove your dishes and, secondly, you could end up flooding your kitchen. Have a trained technician take a look for possible drain pump or motor problems. You can also check for any obstructions before calling a repair professional. Remember, the best way to prevent blockages is to rinse your dishes in your kitchen sink before loading your dishwasher. Large food particles can get stuck and cause major problems.
All dishwashers make some noise. That said, if your dishwasher becomes noisier than usual, then it could be an indication of a wash arm seal, bearing ring, or pump issue. You might also want to check your spray arms and make sure that they are able to rotate without touching the racks. Remember, call in the pros for any part replacements! They will also be able to diagnose the problem within minutes.
If your glasses and glassware are coming out cloudy or white, you could have a serious hard water buildup. Regular cleaning can help prevent this from happening. In many cases, if the buildup is significant, parts may need to be replaced.
Dishwasher doors not latching
If the latch on your dishwasher is not catching, you might need to have it replaced. Apart from normal wear and tear, electronic control issues could also be to blame. Have a technician take a look and perform the necessary repairs.
Like drainage problems, leaks can ruin your day! Before calling a technician, check the drainage hose for damage or cracks. It’s important that you only inspect parts that are easily visible. Do not attempt to remove any parts or you could end up causing more damage.
Dishwasher not filling or won’t stop filling
If your dishwasher does not fill with water, it won’t be able to wash your dishes. If your dishwasher does not fill with water, make sure that your water is turned on. Faulty float
switches, timers, or inlet valves can cause your dishwasher to continue filling and will need to be replaced before you use your dishwasher again.
Dishwasher won’t turn on
If there’s no problem with the power in your home, then the problem might be due to a faulty latch or door switch. If this is not the case, if might be an electronic control issue. No matter the cause of the problem, it’s best to call a technician to diagnose and repair the problem.
Dishes not drying
When you open your dishwasher, you normally need to leave the door open while the heat escapes. If your dishes are not coming out hot and dry, then there could be a problem with the heating element. Have your technician check the element to establish whether or not it’s working properly.
Dishwasher not cleaning properly
If your dishwasher is not cleaning your dishes properly or at all, there could be a number of reasons. The filter screen, sprayer arms, and other parts might be so full of food and grime that they don’t perform properly. Hard water can also cause a buildup that needs to be cleaned. In some cases, various parts can become so clogged and damaged that they need to be replaced. This is when you need to call a professional to get the job done fast.